Description
| Capacity | 600VA / 360W |
| Input | |
| Voltage | 220VAC |
| Voltage range | 140-300 VAC |
| Frequency range | 50Hz |
| Output | |
| AC Voltage regulation (Batt. mode) | ±10% |
| Frequency range (Batt. mode) | 50Hz ±1Hz |
| Transfer time | Typical 4-8ms |
| Waveform (Batt. mode) | Simulated Sine Wave |
| Battery | |
| Battery type & number | 12 V/7Ah x 1 |
| Typical recharge time | 4-6 hours up to 90% capacity |
| Indicators | |
| AC Mode | Green lighting |
| Battery mode | Green flashing |
| Fault | N/A |
| Alarm | |
| Battery mode | No beep till reach low voltage level |
| Low battery | Beep every second |
| Overload | Beep every 0.5 second |
| Fault | Continuously beeping |
| Protection | |
| Full protection | Overload, discharge, and overcharge protection |
| Physical | |
| Dimension, D x W x H (mm) | 279 x 101 x 142 |
| Net. weight (kgs) | 4.2 |
| Environment | |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise level | Less than 40dB |
| *Product specifications are subject to change without further notice | |
| #Load conditions apply. CCTV surveillance system is built up with a DVR , Multi point Power supply, and the Camera array along with the distribution cable , all the above contribute to the main power load on the UPS , hence the Backup time varies according to system setup , make and efficiency of each component in the system. Also the advanced Battery management system protects the full system which has an effect on the back up time. Our results are based on lab test on system having DVR & 2 IR cameras |
|
Reviews
There are no reviews yet.